Product Details
70-223 July 23th,2010.
70-223 Details:
CramBible is your source for the IT Exam 70-223 exam. With our 70-223 Exam Resources, you can be rest assured that you will Pass your 70-223 Exam on Your First Try. Our Exams are written and formatted by Top senior IT Professionals working in today is prospering companies and data centers. All of our practice exams including the 70-223 exam guarantee you success on your First Try. 70-223 is a challenging exam,with our 70-223 study guide,you can feel safe with our question and answer that will help you in obtaining your successful completion of your 70-223 exam.
So this exam can give you a deep insight of the questions and answers that really will guide you through this certification and this is the aim of this to provide you with the test questions and this Exams study notes that will transform you as Certification administrator. This brain dump contains test questions, study guide, practice exam and much more which will not only increase this possibilities to manage the problems but you will also be able to manage online real time problems. The only way to achieve exam guide is to get braindumps only at this .
70-223 Downloadable, Printable Exams PDF format:We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. this Exam Preparation Material provides you everything you will need to take a certification examination. Details are researched and produced by Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key.
Registering for Poweredge server foundations Exam:
You are allowed to register with either Pearson VUE or Prometric to sit for the exam. These examination centers are available worldwide.
70-223 Preparation:
study guide, online test, practice test, exam questions and answers kits, all available from crambible.com. There are also the braindumps and bootcamp that are available.
70-223 In Summary:
1) There are basically six steps that you should follow to earn your way to certification, namely:
2) Decide which certification is right for you - Get a certification overview
3) Gain hands-on experience with products - View requirements for specific certifications
4) Expand your experience with training -Make use of training materials. There are excellent materials available from crambible.com, prepared by experts on their staff.
5) Know what to expect on exams - Review a good study guide.
6) Take a trial run with a practice test-make use of online practice tests and practice exams.
7) Take your required exam - You can register at either Prometric or Pearson VUE test centers.
8) Free Update for 90-days.
Commitment to this Success:
At this we are committed to you ongoing success. this exams and questions are constantly being updated and compared to industry standards.
Testimonials
- Passed
I just used your test engine to pass the exam and I made it easily - thank you!
6
Microsoft MCSE 70-223 Web Demo
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1. You are the administrator of a Windows 2000 Advanced Server
computer. You need to prepare the server for use as a cluster node. The
server contains a SCSI controller and three internal 4.3-GB hard disks.
You plan to attach the server to an external storage subsystem that
contains eight 18.3-GB hard disks. You connect the three 4.3-GB hard
disks to the SCSI controller's internal connector. Next, you connect
the external storage subsystem to the SCSI controller's external
connector. When you start the server, you receive numerous BIOS error
messages that indicate errors on the SCSI bus. Before installing the
Cluster service, you need to be able to access the internal and
external disks that are attached to the server. What should you do?
A. Replace the SCSI controller.
B. Replace the external SCSI cable.
C. Set the SCSI ID to 6.
D. Install an additional SCSI controller in the server.
Connect the external drive array to the new controller's external connector.
E. Disable the on-board SCSI termination on the SCSI controller.
Connect a SCSI terminator to the SCSI-out connector on the external storage subsystem.
Answer: D
2.You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on the servers. You install a SCSI array controller in each server.
Next, you connect the array controllers to an external storage subsystem by using SCSI cables. You need to install at least one SCSI terminator in the external storage subsystem at one or more of the locations shown in the exhibit. (Click the Exhibit button.)
Where should you install a SCSI terminator or SCSI terminators? (Choose all that apply.)
A. Install a SCSI terminator at location 1.
B. Install a SCSI terminator at location 2.
C. Install a SCSI terminator at location 3.
D. Install a SCSI terminator at location 4.
E. Install a SCSI terminator at location 5.
Answer: AE
3. You are the administrator of a two-node Windows 2000 Advanced Server cluster. The cluster is configured as shown in the following diagram.
Adapter 1A and Adapter 2A are designated for Client access only. Adapter 1B and Adapter 2B are designated for Internal cluster communications only.
Which network components represent a single point of failure for internal cluster communications? (Choose all that apply.)
A. Adapter 1A
B. Adapter 1B
C. Adapter 2A
D. Adapter 2B
E. the crossover cable
F. the stand-alone hub
Answer: BDE
4. You are the administrator of two new computers. You need to configure the computers before installing Windows 2000 Advanced Server and the Cluster service. You install a new SCSI controller in each computer. You connect both controllers to an external disk array, which will serve as the cluster storage. The external disk array contains three hard disks. You start both servers and receive a BIOS error message on each server. The error message indicates that a device conflict has been detected on the SCSI bus. You need to correct this error. What should you do?
A. Change the SCSI ID to 0 on all three hard disks.
B. Change the SCSI ID on one of the SCSI controllers.
C. Add a SCSI bus terminator to the connector on the external disk array.
D. Add a SCSI bus terminator to the connectors on both SCSI controllers.
Answer: B
5. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You install two network adapters in each server and then connect them as shown in the following diagram.
You turn off Server2 and begin installing the Cluster service on Server1. In the Cluster Service Configuration wizard, you designate Client access only for Adapter 1B. The wizard does not allow you to configure Adapter 1A, however.
You verify that the crossover cable between Adapter 1A and Adapter 2A is connected properly.
You need to designate Internal cluster communications only for Adapter 1A. What should you do?
A. Start Server2, and enter the BIOS setup screen.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
B. Start Server2, and start Windows 2000 Advanced Server, but do not log on.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
C. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
Connect the crossover cable to Adapter 1A.
D. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for All communications.
Connect the crossover cable to Adapter 1A.
Use the Cluster Administrator to designate Adapter 1A for Internal cluster communications only.
Answer: A
6. You are the cluster administrator for your company. You need to configure two Windows 2000 Advanced Server computers for use as cluster nodes. You need to implement fault-tolerance methods for the local storage. You also need to implement fault-tolerance methods for the external storage subsystem.
Each server contains two 9.3-GB hard disks. The external storage subsystem contains eight 10-GB hard disks. You need to ensure that the cluster can tolerate the failure of a single hard disk in either server and in the external storage subsystem.
Which two fault-tolerance methods should you use? (Choose two.)
A. Configure the hard disks in each server as Windows 2000 striped volumes.
B. Configure the hard disks in each server as Windows 2000 RAID 5 volumes.
C. Configure the hard disks in each server as Windows 2000 mirrored volumes.
D. Configure the hard disks in the external storage subsystem to use a hardware RAID 5 array.
E. Configure the hard disks in the external storage subsystem as Windows 2000 striped volumes.
F. Configure the hard disks in the external storage subsystem as Windows 2000 RAID 5 volumes.
Answer: CD
7. You are the administrator of two Windows 2000 Advanced Server computers. You need to configure these servers for use as cluster nodes.
Each server contains two network adapters. One network adapter in each server is designated for Client access only. The second network adapter in each server is designated for Internal cluster communications only. You plan to connect the second network in each server to a stand-alone hub,
You need to configure the IP addresses for the four network adapters. You want to minimize the chance of a failure in the network connectivity on both servers. What should you do?
A. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
B. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
C. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
D. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
Answer: A
8. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on both servers to create a new cluster.
First, you install two network adapters in each computer. You connect and configure the network adapters as shown in the following diagram.
You successfully install the Cluster service on Server1 and create a cluster named Cluster1.
Next, you attempt to install the Cluster service on Server2 and to join Server2 to Cluster1. The Cluster service Setup fails, and you receive the following error message: "Setup was unable to locate Cluster1 on the network."
You want to complete the Cluster service Setup. What should you do?
A. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.14.
Reinstall the Cluster service on both servers.
B. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.13.
Change the IP address on Adapter 2B to 172.17.54.13.
Reinstall the Cluster service on both servers.
C. Change the IP address on Adapter 1A to 172.17.54.14.
Change the IP address on Adapter 2B to 172.17.55.13.
Run the Cluster service Setup on Server2.
D. Change the IP address on Adapter 1B to 172.17.55.13.
Change the IP address on Adapter 2A to 172.17.54.14.
Run the Cluster service Setup on Server2.
Answer: D
?>
A. Replace the SCSI controller.
B. Replace the external SCSI cable.
C. Set the SCSI ID to 6.
D. Install an additional SCSI controller in the server.
Connect the external drive array to the new controller's external connector.
E. Disable the on-board SCSI termination on the SCSI controller.
Connect a SCSI terminator to the SCSI-out connector on the external storage subsystem.
Answer: D
2.You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on the servers. You install a SCSI array controller in each server.
Next, you connect the array controllers to an external storage subsystem by using SCSI cables. You need to install at least one SCSI terminator in the external storage subsystem at one or more of the locations shown in the exhibit. (Click the Exhibit button.)
Where should you install a SCSI terminator or SCSI terminators? (Choose all that apply.)
A. Install a SCSI terminator at location 1.
B. Install a SCSI terminator at location 2.
C. Install a SCSI terminator at location 3.
D. Install a SCSI terminator at location 4.
E. Install a SCSI terminator at location 5.
Answer: AE
3. You are the administrator of a two-node Windows 2000 Advanced Server cluster. The cluster is configured as shown in the following diagram.
Adapter 1A and Adapter 2A are designated for Client access only. Adapter 1B and Adapter 2B are designated for Internal cluster communications only.
Which network components represent a single point of failure for internal cluster communications? (Choose all that apply.)
A. Adapter 1A
B. Adapter 1B
C. Adapter 2A
D. Adapter 2B
E. the crossover cable
F. the stand-alone hub
Answer: BDE
4. You are the administrator of two new computers. You need to configure the computers before installing Windows 2000 Advanced Server and the Cluster service. You install a new SCSI controller in each computer. You connect both controllers to an external disk array, which will serve as the cluster storage. The external disk array contains three hard disks. You start both servers and receive a BIOS error message on each server. The error message indicates that a device conflict has been detected on the SCSI bus. You need to correct this error. What should you do?
A. Change the SCSI ID to 0 on all three hard disks.
B. Change the SCSI ID on one of the SCSI controllers.
C. Add a SCSI bus terminator to the connector on the external disk array.
D. Add a SCSI bus terminator to the connectors on both SCSI controllers.
Answer: B
5. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You install two network adapters in each server and then connect them as shown in the following diagram.
You turn off Server2 and begin installing the Cluster service on Server1. In the Cluster Service Configuration wizard, you designate Client access only for Adapter 1B. The wizard does not allow you to configure Adapter 1A, however.
You verify that the crossover cable between Adapter 1A and Adapter 2A is connected properly.
You need to designate Internal cluster communications only for Adapter 1A. What should you do?
A. Start Server2, and enter the BIOS setup screen.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
B. Start Server2, and start Windows 2000 Advanced Server, but do not log on.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
C. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for Internal cluster communications only.
Connect the crossover cable to Adapter 1A.
D. Disconnect the crossover cable from Adapter 1A.
Run the Cluster Service Configuration wizard on Server1.
Designate Adapter 1A for All communications.
Connect the crossover cable to Adapter 1A.
Use the Cluster Administrator to designate Adapter 1A for Internal cluster communications only.
Answer: A
6. You are the cluster administrator for your company. You need to configure two Windows 2000 Advanced Server computers for use as cluster nodes. You need to implement fault-tolerance methods for the local storage. You also need to implement fault-tolerance methods for the external storage subsystem.
Each server contains two 9.3-GB hard disks. The external storage subsystem contains eight 10-GB hard disks. You need to ensure that the cluster can tolerate the failure of a single hard disk in either server and in the external storage subsystem.
Which two fault-tolerance methods should you use? (Choose two.)
A. Configure the hard disks in each server as Windows 2000 striped volumes.
B. Configure the hard disks in each server as Windows 2000 RAID 5 volumes.
C. Configure the hard disks in each server as Windows 2000 mirrored volumes.
D. Configure the hard disks in the external storage subsystem to use a hardware RAID 5 array.
E. Configure the hard disks in the external storage subsystem as Windows 2000 striped volumes.
F. Configure the hard disks in the external storage subsystem as Windows 2000 RAID 5 volumes.
Answer: CD
7. You are the administrator of two Windows 2000 Advanced Server computers. You need to configure these servers for use as cluster nodes.
Each server contains two network adapters. One network adapter in each server is designated for Client access only. The second network adapter in each server is designated for Internal cluster communications only. You plan to connect the second network in each server to a stand-alone hub,
You need to configure the IP addresses for the four network adapters. You want to minimize the chance of a failure in the network connectivity on both servers. What should you do?
A. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
B. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
C. Configure static IP addresses for the network adapters that are designated for Client access only.
Configure dynamic IP addresses for the network adapters that are designated for Internal cluster communications only.
D. Configure dynamic IP addresses for the network adapters that are designated for Client access only.
Configure static IP addresses for the network adapters that are designated for Internal cluster communications only.
Answer: A
8. You are the administrator of two Windows 2000 Advanced Server computers named Server1 and Server2. You need to install the Cluster service on both servers to create a new cluster.
First, you install two network adapters in each computer. You connect and configure the network adapters as shown in the following diagram.
You successfully install the Cluster service on Server1 and create a cluster named Cluster1.
Next, you attempt to install the Cluster service on Server2 and to join Server2 to Cluster1. The Cluster service Setup fails, and you receive the following error message: "Setup was unable to locate Cluster1 on the network."
You want to complete the Cluster service Setup. What should you do?
A. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.14.
Reinstall the Cluster service on both servers.
B. Uninstall the Cluster service on Server1.
Change the IP address on Adapter 1A to 172.17.55.13.
Change the IP address on Adapter 2B to 172.17.54.13.
Reinstall the Cluster service on both servers.
C. Change the IP address on Adapter 1A to 172.17.54.14.
Change the IP address on Adapter 2B to 172.17.55.13.
Run the Cluster service Setup on Server2.
D. Change the IP address on Adapter 1B to 172.17.55.13.
Change the IP address on Adapter 2A to 172.17.54.14.
Run the Cluster service Setup on Server2.
Answer: D
Any charges made through this site will appear as CramBible LTD. All trademarks are the property of their respective owners.
©1998 - 2010 Easy CramBible Lab. All Rights Reserved.
Crambible materials do not contain actual questions and answers from Microsoft's and Cisco's Certification Exams.